DEVELOPMENT COMPOSITE ALUMINIUM/FLY ASH WITH POWDER METALLURGY METHOD USE EGG YOLK AS SPACE HOLDER
DOI:
https://doi.org/10.51630/ijes.v2i1.7Keywords:
Composite, Porous Material, Aluminum, Fly Ash, Powder MettalurgyAbstract
Metal matrix composite has been used widely in some applications such as the automotive and aerospace industries. In this work, Aluminum/Fly ash composite material was made with an egg yolk space holder and the manufacturing process was successfully carried out. The process includes the mixing, stirring, drying, and sintering processes that were undertaken including the powder metallurgy method. The metal form has successfully been fabricated however the hardness test results for specimens were not very satisfactory. The Aluminum/Fly ash porous composite materials with egg yolk space holders were was characterized using X-Ray Florence (XRF), X-Ray Diffraction (XRD) test by producing the main peak of Al N and Al2O3. Observation of SEM by showing phenomena such as; cracks, alignment, and porous. Density Testing by producing an average porosity of 28.87%. The observation of Optical Microscopes by showing the shape of the shaft that is not homogeneous.
Downloads
References
A. Arifin, R. Sipahutar, D. K. Pratiwi, I. Bizzy, D. W. I. Purba, and Gunawan, “Effect of fly ash as reinforcement on mechanical properties of aluminum scrap based hybrid composite,” J. Eng. Sci. Technol., vol. 13, no. 10, 2018.
A. Arifin, R. Sipahutar, D. K. Pratiwi, I. Bizzy, D. Purba, and Gunawan, “Effect of Fly Ash As Reinforcement on Mechanical Properties of Aluminum Scrap Based Hybrid Composite,” J. Eng. Sci. Technol., vol. 13, no. 10, pp. 3080–3091, 2018.
G. Gunawan, A. Arifin, I. Yani, and M. Indrajaya, “Characterization of porous hydroxyapatite-alumina composite scaffold produced via powder compaction method,” in IOP Conference Series: Materials Science and Engineering, 2019, vol. 620, no. 1, doi: 10.1088/1757-899X/620/1/012107.
M. P. Groover, Fundamentals of Modern Manufacturing: Materials, Processes, and Systems. John Wiley & Sons, 2010.
A. Arifin, A. B. Sulong, L. C. Fun, Gunawan, and I. Yani, “Porous titanium alloy/hydroxyapatite composite using powder compaction route,” J. Mech. Eng. Sci., vol. 11, no. 2, 2017, doi: 10.15282/jmes.11.2.2017.10.0244.
Q. Z. Wang, C. X. Cui, S. J. Liu, and L. C. Zhao, “Open-celled porous Cu prepared by replication of NaCl space-holders,” Mater. Sci. Eng. A, vol. 527, no. 4–5, pp. 1275–1278, 2010, doi: 10.1016/j.msea.2009.10.062.
A. Arifin, G. Gunawan, and S. A. Chandra, “Fabrication Of Composite Copper/Fly Ash Foam With Egg Yolk as Foaming Agent,” Indones. J. Eng. Sci., vol. 1, no. 1, pp. 001–009, Jan. 2021, doi: 10.51630/ijes.v1i1.4.
A. Arifin, Gunawan, A. Priyadi, and F. A. Sanjaya, “Development and characterization of porous hydroxyapatite-Alumina composite for engineering application,” IOP Conf. Ser. Mater. Sci. Eng., vol. 857, p. 12005, 2020, doi: 10.1088/1757-899x/857/1/012005.
Gunawan, A. Arifin, I. Yani, and S. D. Arian, “The Fabrication Porous hydroxyapatite Scaffold Using Sweet Potato Starch as a Natural Space Holder,” in Journal of Physics: Conference Series, 2019, vol. 1198, no. 4, doi: 10.1088/1742-6596/1198/4/042020.
A. Wijaya, B. Eichinger, M. Mischitz, and R. Brunner, “3D Characterization of Porous Copper Thin Films,” Microsc. Microanal., vol. 25, no. S2, pp. 348–349, Aug. 2019, doi: 10.1017/S1431927619002472.
Gunawan, A. Arifin, M. Reza, and A. N. P. Wijaya, “Development of aluminum matrix composite with hybrid reinforcement using stir casting route,” in IOP Conference Series: Materials Science and Engineering, 2020, vol. 857, no. 1, doi: 10.1088/1757-899X/857/1/012007.
S. Trushad, W. Kuruneru, K. Vafai, E. Sauret, and Y. Gu, “Application of porous metal foam heat exchangers and the implications of particulate fouling for energy-intensive industries,” Chem. Eng. Sci., vol. 228, p. 115968, 2020, doi: 10.1016/j.ces.2020.115968.
C. Y. Zhao, “Review on thermal transport in high porosity cellular metal foams with open cells,” Int. J. Heat Mass Transf., vol. 55, no. 13–14, pp. 3618–3632, 2012, doi: 10.1016/j.ijheatmasstransfer.2012.03.017.
H. Zhao et al., “Compact 3D Copper with Uniform Porous Structure Derived by Electrochemical Dealloying as Dendrite-Free Lithium Metal Anode Current Collector,” Adv. Energy Mater., vol. 8, no. 19, p. 1800266, Jul. 2018, doi: 10.1002/aenm.201800266.
B. Bian et al., “Application of 3D printed porous copper anode in microbial fuel cells,” Front. Energy Res., vol. 6, no. JUN, 2018, doi: 10.3389/fenrg.2018.00050.
M. Niinomi, “Mechanical biocompatibilities of titanium alloys for biomedical applications,” J. Mech. Behav. Biomed. Mater., vol. 1, no. 1, pp. 30–42, 2008, doi: 10.1016/j.jmbbm.2007.07.001.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Amir Arifin, Gunawan Gunawan, Alim Mardhi, Agung Nurmansyah Putra Wijaya, Endra Sujatmika
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
![](https://www.aps.or.id/journal/index.php/ijes/management/settings/<a rel="license" href="http:/creativecommons.org/licenses/by-nc-nd/4.0/"><img alt="Creative Commons License" style="border-width:0" src="https:/i.creativecommons.org/l/by-nc-nd/4.0/88x31.png" /></a><br />This work is licensed under a <a rel="license" href="http:/creativecommons.org/licenses/by-nc-nd/4.0/">Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License</a>.)
