A SURVEY OF LINEAR CONTROL FOR EXPERIMENTAL BALL AND BEAM WITH MIDDLE AXIS
DOI:
https://doi.org/10.51630/ijes.v6i1.149Keywords:
LQR control, PID Control, Pole placement, Ball and Beam, Linear ControlAbstract
This paper presents an experimental study of linear control algorithms applied to a Ball and Beam system with a central axis. The focus is on evaluating the ball's ability to remain balanced around the central axis and assessing the stability of linear control strategies in real-world applications. The system is controlled using an STM32F4 microcontroller, which manages a DC motor to adjust the beam's angle in response to the ball's position. Through a series of experiments and data analysis, the study explores the effectiveness of linear control in addressing the system's nonlinear dynamics and discusses the practical challenges faced during implementation. The results contribute to a deeper understanding of advanced control techniques and their potential applications in engineering.
Downloads
References
Nguyen Minh Quan et al, “Fuzzy Controller from Experts’ Rules for Middle Axis Ball and Beam”, Journal of fuzzy systems and control, Vol. 1, No 3, 2023. doi: 10.59247/jfsc.v1i3.94.
Nguyen Dang Khoa Tran, Mai Ha Truong, Huu Dat Nguyen, Van Tu Le, “Research and using LQR control method for Ball and beam system”, Binh Duong University Journal of Science, 2024. doi: 10.56097/binhduonguniversityjournalofscienceandtechnology.v6i3.176.
Ang K.H, Chong G., Li Y.: “PID control system analysis, design, and technology”, in IEEE Transactions on Control Systems Technology, vol.13, no.4, July 2005.doi: 10.1109/TCST.2005.847331.
Tu Dinh Nguyen, Chi-Ngon Nguyen, Le Hoang Dang, Tran Chi Cuong, “Adaptive control ball and beam using Neuron network RBF”, Can Tho University Journal of Science, 2017. doi: 10.22144/ctu.jvn.2017.064.
Shah M. , Rahat Ali, Fahad Mumtaz: "Control of Ball and Beam with LQR Control Scheme using Flatness Based Approach", International Conference on Computing, Electronic and Electrical Engineering (ICE Cube), 2018. DOI: 10.1109/ICECUBE.2018.8610968.
Huynh Thai Hoang " Intelligent control system ", The National University of Ho Chi Minh City Publishing House, 2014. Link: https://cuudongthancong.com.
Nguyen Thi Phuong Ha, Huynh Thai Hoang, “Automatic Control Theory”, The National University of Ho Chi Minh City Publishing House, 2002. Link: https://cuudongthancong.com.
Dang Ngoc Trung, Tran Thi Thanh Hai, “Research LQR control method for Ball and Beam system”,Thai Nguyen University of Technology Journal of Science, no. 72, page 90 – 93. Link: https://vjol.info.vn.
Van-Chinh Pham et al, ―GA-PID Control for Ball and Beam: Simulation and Experiment‖, International Journal, ISSN-L: 1453- 2069; Print ISSN: 1453-2069; Online ISSN: 2359-9855, Vol. 27, No. 2, pp. 29-35 December 2022. doi: https://doi.org/10.24193/rm.2022.2.5.
S. Latif, E. Muhammad and U. Naeem, "Implementation of ball and beam system using classical and advanced control techniques," 2019 International Conference on Applied and Engineering Mathematics (ICAEM), Taxila, Pakistan, 2019, pp. 74-79. doi: 10.1109/ICAEM.2019.8853822.
T. F. E. Lin S. Tung, "A Study of Pole Placement in Linear Control Design," IEEE Xplore, 1984 American Control Conference. San Diego, CA, USA, 2009. doi: 10.23919/ACC.1984.4788433
F. Gunnarsson, F. Gustafsson, J. Blom, “Pole placement design of power control algorithms”, 1999 IEEE 49th Vehicular Technology Conference (Cat. No.99CH36363), Houston, TX, USA, 2002.doi: 10.1109/VETEC.1999.778433.
Jason J. R. Liu, Nachuan Yang, Ka-Wai Kwok, James Lan, “Proportional‐derivative controller design of continuous‐time positive linear systems” 2021 International Journal of Robust and Nonlinear Control 32, University of Hong Kong 2021.doi: 10.1002/rnc.5809.
U. Holmberg, P. Myszkorowski, D. Bovin,”A pole-placement approach that matches identification and control objectives”, 1997 European Control Conference (ECC), Brussels, Belgium, 2015.doi: 10.23919/ECC.1997.7082214.
Anjali Rai, Santosh Kumar Suman, Awadhesh Kumar, Shekhar Yadav “Impact of Control Stability using LQR and Pole-placement for Ball and Beam System”, 5th International Conference on Intelligent Computing and Control Systems (ICICCS), 2021.doi: 10.1109/ICICCS51141.2021.9432281.
Ali Hmidet, Othman Hasnaoui, “Waijung Blockset-STM32F4 Environment for Real Time Induction Motor Speed Control”, IEEE 5th International Congress on Information Science and Technology (CiSt), 2018.doi: 10.1109/CIST.2018.8596416
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Indonesian Journal of Engineering and Science
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
![](https://www.aps.or.id/journal/index.php/ijes/management/settings/<a rel="license" href="http:/creativecommons.org/licenses/by-nc-nd/4.0/"><img alt="Creative Commons License" style="border-width:0" src="https:/i.creativecommons.org/l/by-nc-nd/4.0/88x31.png" /></a><br />This work is licensed under a <a rel="license" href="http:/creativecommons.org/licenses/by-nc-nd/4.0/">Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License</a>.)
